HDF5 file, superblock version 0
group /
	attribute Conventions = "CF-1.6"
	attribute Metadata_Conventions = "CF-1.6, Unidata Dataset Discovery v1.0"
	attribute cdm_data_type = "trajectoryProfile"
	attribute comment = "This mission is made up of a series of 4 6 hour deployments in Owen and Grand Manan Basins.  The purpose of these deployments is to validate the ASL Acoustic Zooplankton Fish Profiler (AZFP) against optical zooplankton counts and net tows conducted aboard the vessel along side the glider.      The beginning of each day was initiated by on-boat platform tests, a 3m test dive with a float attached to the platform and then lastly a 60-70m dive/climb cycle to verify platform was functioning properly.  Following these two tests dives there are 3-4 mission segments of 2 dive/climb cycles each to full depth."
	attribute contributor_name = "Kim Davies, Jude van der Meer, Delphine Mossman, Márcia Pearson, Xiang Ling, Kate Patterson"
	attribute creator_email = "ceotr@dal.ca"
	attribute creator_name = "Coastal Environmental Observation Technology and Research (CEOTR)"
	attribute creator_url = "http://ceotr.ocean.dal.ca/"
	attribute date_created = "2021-06-02T17:00:26Z"
	attribute date_issued = "2021-06-02T17:00:26Z"
	attribute date_modified = "2021-06-02T17:00:26Z"
	attribute deployment_number = "119"
	attribute deployment_title = "Owen & Grand Manan Basins-AZFP Validation Transects"
	attribute featureType = "trajectory"
	attribute format_version = "IOOS_Glider_NetCDF_v3.0-noqartod.nc"
	attribute geospatial_bounds = "POLYGON ((43.807560 -62.379670, 43.807560 -62.378520, 43.806410 -62.378520, 43.806410 -62.379670, 43.807560 -62.379670))"
	attribute geospatial_lat_max = 43.80756
	attribute geospatial_lat_min = 43.80641
	attribute geospatial_lon_max = -62.37852
	attribute geospatial_lon_min = -62.37967
	attribute geospatial_vertical_max = 121.742
	attribute geospatial_vertical_min = 0.0
	attribute geospatial_vertical_units = "m"
	attribute history = "2021-06-02T17:00:26Z - Created with the GUTILS package: \"/home/slocum/gdp/GUTILS_RUN/GDP/gdp\""
	attribute id = "cabot-2020-09-19 17:05:00"
	attribute institution = "University of New Brunswick"
	attribute keywords = "Oceans > Ocean Pressure > Water Pressure, Oceans > Ocean Temperature > Water Temperature, Oceans > Salinity/Density > Conductivity, Oceans > Salinity/Density > Density, Oceans > Salinity/Density > Salinity"
	attribute keywords_vocabulary = "GCMD Science Keywords"
	attribute license = "This data may be redistributed and used without restriction."
	attribute naming_authority = "org.oceantrackingnetwork"
	attribute platform_type = "Slocum Glider"
	attribute processing_level = "Dataset taken from glider native file format and is provided as is with no expressed or implied assurance of quality assurance or quality control."
	attribute project = "Davies Bay of Fundy Research Cruise"
	attribute publisher_email = "ceotr@dal.ca"
	attribute publisher_name = "Coastal Environmental Observation Technology and Research (CEOTR)"
	attribute publisher_url = "http://ceotr.ocean.dal.ca/gliders/"
	attribute sea_name = "Bay of Fundy"
	attribute source = "Observational data from a profiling glider"
	attribute standard_name_vocabulary = "CF Standard Name Table v60"
	attribute summary = "Slocum gliders are small, free-swimming, unmanned vehicles that use changes in buoyancy to move vertically and horizontally through the water column in a saw-tooth pattern. They are deployed for days to several months and gather detailed information about the physical, chemical and biological processes of the world's oceans. The Slocum glider was designed and built by Teledyne Webb Research Corporation, Falmouth, MA, USA."
	attribute testing_mission = "False"
	attribute time_coverage_duration = "P0DT0H12M50.686800003S"
	attribute time_coverage_end = "2021-05-26T06:51:36Z"
	attribute time_coverage_start = "2021-05-26T06:38:45Z"
dataset /c_heading: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "This is the heading the glider is trying to achieve. It is not a measured value, see measured heading for actual heading values."
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_flight_commanded"
	attribute long_name = "Commanded Heading"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "c_heading"
	attribute standard_name = "None"
	attribute units = "rad"
dataset /c_thruster_on: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "Commanded thruster power as a percentage, 0% off, 100% max power. This sensor makes noise"
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_flight_commanded"
	attribute long_name = "Commanded Thruster On"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "c_thruster_on"
	attribute standard_name = "None"
	attribute units = "%"
dataset /conductivity: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute colorBarMaximum = 9.0
	attribute colorBarMinimum = 0.0
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_ctd"
	attribute ioos_category = "Salinity"
	attribute long_name = "Sea Water Electrical Conductivity"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute standard_name = "sea_water_electrical_conductivity"
	attribute units = "S.m-1"
	attribute valid_max = 10
	attribute valid_min = 0
dataset /crs: int32, shape ()
	attribute epsg_code = "EPSG:4326"
	attribute grid_mapping_name = "latitude_longitude"
	attribute inverse_flattening = 298.257223563
	attribute ioos_category = "Other"
	attribute long_name = "http://www.opengis.net/def/crs/EPSG/0/4326"
	attribute semi_major_axis = 6378137.0
dataset /density: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute colorBarMaximum = 1032.0
	attribute colorBarMinimum = 1020.0
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_ctd"
	attribute ioos_category = "Other"
	attribute long_name = "Sea Water Density"
	attribute observation_type = "calculated"
	attribute platform = "platform"
	attribute standard_name = "sea_water_density"
	attribute units = "kg.m-3"
	attribute valid_max = 1040.0
	attribute valid_min = 1015.0
dataset /depth: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute axis = "Z"
	attribute colorBarMaximum = 2000.0
	attribute colorBarMinimum = 0.0
	attribute colorBarPalette = "OceanDepth"
	attribute comment = "depth is generate by both sci_water_pressure or m_water_pressure mixture"
	attribute coordinates = "time depth lon lat"
	attribute ioos_category = "Location"
	attribute long_name = "Depth"
	attribute observation_type = "calculated"
	attribute platform = "platform"
	attribute positive = "down"
	attribute reference_datum = "sea-surface"
	attribute standard_name = "depth"
	attribute units = "m"
	attribute valid_max = 2000.0
	attribute valid_min = 0.0
dataset /instrument_Science_Bay: int32, shape ()
	attribute _FillValue = -999
	attribute comment = "G3 Payload Bay"
	attribute identifier = "sci_bay"
	attribute long_name = "Slocum Glider Science Payload Bay"
	attribute platform = "cabot"
	attribute serial_number = "1296"
	attribute short_name = "Science Bay"
	attribute type = "instrument"
dataset /instrument_bpump: int32, shape ()
	attribute _FillValue = -999
	attribute identifier = "ballast_pump"
	attribute long_name = "Slocum Glider G3 200 m piston pump"
	attribute platform = "cabot"
	attribute serial_number = "0111"
	attribute short_name = "bpump"
	attribute type = "instrument"
dataset /instrument_ctd: int32, shape ()
	attribute _FillValue = -999
	attribute comment = "Pumped CTD"
	attribute identifier = "sci_water"
	attribute long_name = "Glider Payload CTD"
	attribute platform = "cabot"
	attribute serial_number = "9411"
	attribute short_name = "ctd"
	attribute type = "instrument"
dataset /instrument_echosounder: int32, shape ()
	attribute _FillValue = -999
	attribute comment = "Acoustic backscatter frequencies: 130, 200, 455, 769 kHz"
	attribute identifier = "sci_azfp"
	attribute long_name = "AZFP"
	attribute platform = "cabot"
	attribute serial_number = "59016"
	attribute short_name = "echosounder"
	attribute type = "instrument"
dataset /instrument_flight_commanded: int32, shape ()
	attribute _FillValue = -999
	attribute identifier = "c"
	attribute long_name = "flight computer commanded"
	attribute platform = "cabot"
	attribute serial_number = "712"
	attribute short_name = "flight commanded"
	attribute type = "instrument"
dataset /instrument_flight_measured: int32, shape ()
	attribute _FillValue = -999
	attribute comment = "This is Cabot's flight computer (G3 Glider) ."
	attribute identifier = "m"
	attribute long_name = "flight computer measured"
	attribute platform = "cabot"
	attribute serial_number = "712"
	attribute short_name = "flight measured"
	attribute type = "instrument"
dataset /instrument_fluorometer: int32, shape ()
	attribute _FillValue = -999
	attribute comment = "Factory cal (from autoexec) - 2018-07-17  # sensor specific calibration constants for FLBB SN 5074    sensor: u_flbbbbV1_fl_cwo(nodim)      46   # clean water dark offset, nodim == counts    sensor: u_flbbbbV1_bb1_cwo(nodim)          43   # clean water dark offset, nodim == counts    sensor: u_flbbbbV1_bb2_cwo(nodim)        42   # clean water dark offset, nodim == counts    sensor: u_flbbbbV1_chlor_sf(ug/l/nodim)   0.0073   # scale factor to get units    sensor: u_flbbbbV1_bb1_sf(Mnodim)          1.845     # scale factor to get units    sensor: u_flbbbbV1_bb2_sf(ppb/nodim)     4.405   # scale factor to get units    sensor: u_flbbcd_is_calibrated(bool)    1   # set to 1 after entering                                                # calibration constants"
	attribute identifier = "sci_flbbbbv1"
	attribute long_name = "ECO Triplet"
	attribute platform = "cabot"
	attribute serial_number = "5074"
	attribute short_name = "fluorometer"
	attribute type = "instrument"
dataset /instrument_oxygen_optode: int32, shape ()
	attribute _FillValue = -999
	attribute identifier = "sci_oxy4"
	attribute long_name = "Optode 4831"
	attribute platform = "cabot"
	attribute serial_number = "658"
	attribute short_name = "oxygen optode"
	attribute type = "instrument"
dataset /instrument_vmt: int32, shape ()
	attribute _FillValue = -999
	attribute comment = "MAP-114, set to 'Always Tx', ID: 11808."
	attribute identifier = "vmt"
	attribute long_name = "VEMCO mobile transceiver"
	attribute platform = "cabot"
	attribute serial_number = "1282444"
	attribute short_name = "vmt"
	attribute type = "instrument"
dataset /lat: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute axis = "Y"
	attribute colorBarMaximum = 90.0
	attribute colorBarMinimum = -90.0
	attribute comment = "Interpolated latitude at each point in the time-series"
	attribute coordinate_reference_frame = "urn:ogc:crs:EPSG::4326"
	attribute coordinates = "time depth lon lat"
	attribute ioos_category = "Location"
	attribute long_name = "Latitude"
	attribute observation_type = "measured and interpolated"
	attribute platform = "platform"
	attribute references = "WGS84"
	attribute standard_name = "latitude"
	attribute units = "degrees_north"
	attribute valid_max = 90.0
	attribute valid_min = -90.0
dataset /lat_uv: float64, shape ()
	attribute _FillValue = -999.0
	attribute colorBarMaximum = 90.0
	attribute colorBarMinimum = -90.0
	attribute comment = "The depth-averaged current is an estimate of the net current measured while the glider is underwater.  The value is calculated over the entire underwater segment, which may consist of 1 or more dives."
	attribute ioos_category = "Location"
	attribute long_name = "Depth Averaged Latitude"
	attribute observation_type = "calculated"
	attribute platform = "platform"
	attribute standard_name = "latitude"
	attribute units = "degrees_north"
	attribute valid_max = 90.0
	attribute valid_min = -90.0
dataset /lon: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute axis = "X"
	attribute colorBarMaximum = 180.0
	attribute colorBarMinimum = -180.0
	attribute comment = "Values may be interpolated between measured GPS fixes."
	attribute coordinate_reference_frame = "urn:ogc:crs:EPSG::4326"
	attribute coordinates = "time depth lon lat"
	attribute ioos_category = "Location"
	attribute long_name = "Longitude"
	attribute observation_type = "measured and interpolated"
	attribute platform = "platform"
	attribute references = "WGS84"
	attribute standard_name = "longitude"
	attribute units = "degrees_east"
	attribute valid_max = 180.0
	attribute valid_min = -180.0
dataset /lon_uv: float64, shape ()
	attribute _FillValue = -999.0
	attribute colorBarMaximum = 180.0
	attribute colorBarMinimum = -180.0
	attribute comment = "The depth-averaged current is an estimate of the net current measured while the glider is underwater.  The value is calculated over the entire underwater segment, which may consist of 1 or more dives."
	attribute ioos_category = "Location"
	attribute long_name = "Depth Averaged Longitude"
	attribute observation_type = "calculated"
	attribute platform = "platform"
	attribute standard_name = "longitude"
	attribute units = "degrees_east"
	attribute valid_max = 180.0
	attribute valid_min = -180.0
dataset /m_ballast_pumped: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "Measured position of the ballast pump. This sensor makes noise when moving."
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_flight_measured"
	attribute long_name = "Measured Ballast Pump Piston Volume"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "m_ballast_pumped"
	attribute standard_name = "None"
	attribute units = "cc"
dataset /m_battery: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_flight_measured"
	attribute long_name = "Battery Voltage"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "m_battery"
	attribute standard_name = "None"
	attribute units = "volts"
	attribute valid_max = 17.0
	attribute valid_min = 0.0
dataset /m_battpos: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "Measured position of the pitch battery. This sensor makes noise when moving."
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_flight_measured"
	attribute long_name = "Measured Position Pitch Battery"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "m_battpos"
	attribute standard_name = "None"
	attribute units = "inch"
dataset /m_bms_aft_current: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "G3 BMS (battery management system) instantaneous measurement of amperage for aft battery pack."
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_flight_measured"
	attribute long_name = "Intantaneous Aft Current"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "m_bms_aft_current"
	attribute standard_name = "None"
	attribute units = "amps"
dataset /m_bms_pitch_current: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "G3 BMS (battery management system) instantaneous measurement of amperage for pitch battery pack."
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_flight_measured"
	attribute long_name = "Intantaneous Pitch Current"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "m_bms_pitch_current"
	attribute standard_name = "None"
	attribute units = "amps"
dataset /m_coulomb_amphr_total: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "Total amp-hrs measured since last coulomb_amphr_total reset."
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_flight_measured"
	attribute long_name = "Coulomb Ampere Hours Total"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "m_coulomb_amphr_total"
	attribute standard_name = "None"
	attribute units = "amp-hrs"
	attribute valid_max = 1500.0
	attribute valid_min = 0.0
dataset /m_de_oil_vol: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "Measured position of the ballast pump. This sensor makes noise when moving."
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_flight_measured"
	attribute long_name = "Measured Ballast Pump Oil Volume"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "m_de_oil_vol"
	attribute standard_name = "None"
	attribute units = "cc"
dataset /m_depth: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "Calculated glider depth from  glider's measured AD voltage from pressure transducer     m_depth -> 0.1 bar/meter   clips at 0.    Not meant to be very precise,   not well temperature compensated."
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_flight_measured"
	attribute long_name = "M Depth"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "m_depth"
	attribute standard_name = "depth"
	attribute units = "m"
dataset /m_depth_rate_avg_final: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "Average depth rate, over 10 samples."
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_flight_measured"
	attribute long_name = "Average Vertical Velocity"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "m_depth_rate_avg_final"
	attribute standard_name = "platform_heave_rate_down"
	attribute units = "m s-1"
dataset /m_fin: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "Measured position of the gliders fin. This sensor makes noise however this is a new model of fin makes less noise then the digifin (the digifin is common on G2 gliders)."
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_flight_measured"
	attribute long_name = "Measured Fin Position"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "m_fin"
	attribute standard_name = "None"
	attribute units = "rad"
dataset /m_gps_lat: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "Measured by the GPS while the glider is at the surface  DDMM.MMMM   >0 ==> North   <0 ==> South"
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_flight_measured"
	attribute long_name = "Measured Gps Latitude"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "m_gps_lat"
	attribute standard_name = "None"
	attribute units = "degrees_north"
dataset /m_gps_lon: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "DDMM.MMMM   >0 ==> East    <0 ==> West"
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_flight_measured"
	attribute long_name = "Measured Gps Longitude"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "m_gps_lon"
	attribute standard_name = "None"
	attribute units = "degrees_east"
dataset /m_heading: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "This is measured by the gliders attitude sensor. This is the heading of the glider."
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_flight_measured"
	attribute long_name = "Measured Heading"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "m_heading"
	attribute standard_name = "platform_orientation"
	attribute units = "rad"
dataset /m_pitch: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "This is measured by the gliders attitude sensor. Positive pitch is nose up, negative pitch is nose down."
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_flight_measured"
	attribute long_name = "Measured Pitch"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "m_pitch"
	attribute standard_name = "platform_pitch_angle"
	attribute units = "rad"
dataset /m_roll: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "This is measured by the gliders attitude sensor. Positive roll is starboard side down (clockwise), negative roll is starboard side up."
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_flight_measured"
	attribute long_name = "Measured Roll"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "m_roll"
	attribute standard_name = "platform_roll_angle"
	attribute units = "rad"
dataset /m_thruster_power: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "Measured thruster power consumption. This sensor makes noise when on."
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_flight_measured"
	attribute long_name = "Measured Thruster Power Consumption"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "m_thruster_power"
	attribute standard_name = "None"
	attribute units = "watt"
dataset /m_veh_temp: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "Temperature of the inside of the glider, unsure of the accuracy, useful for diagnosing changes in vacuum."
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_flight_measured"
	attribute long_name = "Temperature Inside Glider"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "m_veh_temp"
	attribute standard_name = "None"
	attribute units = "degC"
dataset /m_water_depth: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "This variable is determined by adding the depth of the glider, as measured by the flight computers pressure sensor, to the depth between the glider and the seafloor, measured by the altimeter."
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_flight_measured"
	attribute long_name = "Water Depth"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "m_water_depth"
	attribute standard_name = "sea_floor_depth_below_sea_surface"
	attribute units = "m"
dataset /platform: int32, shape ()
	attribute _FillValue = -999
	attribute instrument = "instrument_ctd"
	attribute ioos_category = "Identifier"
	attribute long_name = "cabot"
	attribute type = "platform"
dataset /pressure: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute colorBarMaximum = 2000.0
	attribute colorBarMinimum = 0.0
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_ctd"
	attribute ioos_category = "Pressure"
	attribute long_name = "Sea Water Pressure"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute positive = "down"
	attribute reference_datum = "sea-surface"
	attribute standard_name = "sea_water_pressure"
	attribute units = "dbar"
	attribute valid_max = 2000.0
	attribute valid_min = 0.0
dataset /profile_id: int32, shape ()
	attribute _FillValue = -999
	attribute cf_role = "profile_id"
	attribute colorBarMaximum = 2500000000.0
	attribute colorBarMinimum = 0.0
	attribute comment = "Sequential profile number within the trajectory.  This value is unique in each file that is part of a single trajectory/deployment."
	attribute ioos_category = "Identifier"
	attribute long_name = "Profile ID"
	attribute valid_max = 2147483647
	attribute valid_min = 1
dataset /profile_lat: float64, shape ()
	attribute _FillValue = -9999.9
	attribute colorBarMaximum = 90.0
	attribute colorBarMinimum = -90.0
	attribute comment = "Value is interpolated to provide an estimate of the latitude at the mid-point of the profile"
	attribute ioos_category = "Location"
	attribute long_name = "Profile Latitude"
	attribute observation_type = "calculated"
	attribute platform = "platform"
	attribute standard_name = "latitude"
	attribute units = "degrees_north"
	attribute valid_max = 90.0
	attribute valid_min = -90.0
dataset /profile_lon: float64, shape ()
	attribute _FillValue = -9999.9
	attribute colorBarMaximum = 180.0
	attribute colorBarMinimum = -180.0
	attribute comment = "Value is interpolated to provide an estimate of the longitude at the mid-point of the profile"
	attribute ioos_category = "Location"
	attribute long_name = "Profile Longitude"
	attribute observation_type = "calculated"
	attribute platform = "platform"
	attribute standard_name = "longitude"
	attribute units = "degrees_east"
	attribute valid_max = 180.0
	attribute valid_min = -180.0
dataset /profile_time: float64, shape ()
	attribute _FillValue = -9999.9
	attribute calendar = "gregorian"
	attribute comment = "Timestamp corresponding to the mid-point of the profile"
	attribute ioos_category = "Time"
	attribute long_name = "Profile Time"
	attribute observation_type = "calculated"
	attribute platform = "platform"
	attribute standard_name = "time"
	attribute units = "seconds since 1990-01-01T00:00:00Z"
dataset /salinity: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute colorBarMaximum = 37.0
	attribute colorBarMinimum = 30.0
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_ctd"
	attribute ioos_category = "Salinity"
	attribute long_name = "Sea Water Practical Salinity"
	attribute observation_type = "calculated"
	attribute platform = "platform"
	attribute standard_name = "sea_water_practical_salinity"
	attribute units = "psu"
	attribute valid_max = 40.0
	attribute valid_min = 0.0
dataset /sci_flbbbbv1_bb1_scaled: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "scatter measured at 700nm   Instrument resolution is 1.3 counts 2.41E-06 (/m /sr)  Back scattering centroid angle = 124°"
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_fluorometer"
	attribute long_name = "Volume Scattering"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "sci_flbbbbv1_bb1_scaled"
	attribute standard_name = "None"
	attribute units = "/m /sr"
dataset /sci_flbbbbv1_bb2_scaled: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "scatter measured at 532nm   Instrument resolution: 1.4 counts  6.01E-06 (/m /sr)  Back scattering centroid angle = 124°"
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_fluorometer"
	attribute long_name = "Volume Scattering"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "sci_flbbbbv1_bb2_scaled"
	attribute standard_name = "None"
	attribute units = "/m /sr"
dataset /sci_flbbbbv1_fl_scaled: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "in situ chlorophyl fluorescence as measured by eco triplet   470/695nm  (0-30ug/L)"
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_fluorometer"
	attribute long_name = "Chlorophyll A Fluorescence"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "sci_flbbbbv1_fl_scaled"
	attribute standard_name = "None"
	attribute units = "ug/L"
dataset /sci_oxy4_oxygen: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute comment = "The units are micro moles per liter"
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_oxygen_optode"
	attribute long_name = "Dissolved Oxygen Concentration"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "sci_oxy4_oxygen"
	attribute standard_name = "mole_concentration_of_dissolved_molecular_oxygen_in_sea_water"
	attribute units = "uM"
dataset /sci_water_depth: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_ctd"
	attribute ioos_category = "Other"
	attribute long_name = "Sci Water Depth"
	attribute platform = "platform"
	attribute resolution = "None"
	attribute standard_name = "sea_water_depth"
	attribute units = "m"
dataset /sci_water_pressure: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute accuracy = "None"
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_ctd"
	attribute long_name = "Pressure"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute precision = "None"
	attribute resolution = "None"
	attribute sensor_identifier = "sci_water_pressure"
	attribute standard_name = "sea_water_pressure"
	attribute units = "bar"
dataset /temperature: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute colorBarMaximum = 32.0
	attribute colorBarMinimum = 0.0
	attribute coordinates = "time depth lon lat"
	attribute instrument = "instrument_ctd"
	attribute ioos_category = "Temperature"
	attribute long_name = "Sea Water Temperature"
	attribute observation_type = "measured"
	attribute platform = "platform"
	attribute standard_name = "sea_water_temperature"
	attribute units = "Celsius"
	attribute valid_max = 40.0
	attribute valid_min = -5.0
dataset /time: float64, shape (37)
	attribute _FillValue = -9999.9
	attribute axis = "T"
	attribute calendar = "gregorian"
	attribute comment = "Measured or calculated time at each point in the time-series"
	attribute coordinates = "time depth lon lat"
	attribute ioos_category = "Time"
	attribute long_name = "Time"
	attribute observation_type = "measured"
	attribute standard_name = "time"
	attribute units = "seconds since 1990-01-01T00:00:00Z"
// time: first 990859125.88434, last 990859896.57114, count 37
dataset /time_uv: float64, shape ()
	attribute _FillValue = -999.0
	attribute calendar = "gregorian"
	attribute comment = "The depth-averaged current is an estimate of the net current measured while the glider is underwater.  The value is calculated over the entire underwater segment, which may consist of 1 or more dives."
	attribute ioos_category = "Time"
	attribute long_name = "Depth-Averaged Time"
	attribute observation_type = "calculated"
	attribute standard_name = "time"
	attribute units = "seconds since 1990-01-01T00:00:00Z"
dataset /trajectory: string, shape ()
	attribute cf_role = "trajectory_id"
	attribute comment = "A trajectory is a single deployment of a glider and may span multiple data files."
	attribute coordinates = "time depth lon lat"
	attribute ioos_category = "Identifier"
	attribute long_name = "Trajectory/Deployment Name"
	text = "cabot-2020-09-19 17:05:00"
dataset /u: float64, shape ()
	attribute _FillValue = 25.0
	attribute colorBarMaximum = 0.5
	attribute colorBarMinimum = -0.5
	attribute comment = "The depth-averaged current is an estimate of the net current measured while the glider is underwater.  The value is calculated over the entire underwater segment, which may consist of 1 or more dives."
	attribute ioos_category = "Currents"
	attribute long_name = "Depth-Averaged Eastward Sea Water Velocity"
	attribute observation_type = "calculated"
	attribute platform = "platform"
	attribute standard_name = "eastward_sea_water_velocity"
	attribute units = "m s-1"
	attribute valid_max = 10.0
	attribute valid_min = -10.0
dataset /v: float64, shape ()
	attribute _FillValue = 25.0
	attribute colorBarMaximum = 0.5
	attribute colorBarMinimum = -0.5
	attribute comment = "The depth-averaged current is an estimate of the net current measured while the glider is underwater.  The value is calculated over the entire underwater segment, which may consist of 1 or more dives."
	attribute ioos_category = "Currents"
	attribute long_name = "Depth-Averaged Northward Sea Water Velocity"
	attribute observation_type = "calculated"
	attribute platform = "platform"
	attribute standard_name = "northward_sea_water_velocity"
	attribute units = "m.s-1"
	attribute valid_max = 10.0
	attribute valid_min = -10.0